Products LED Pinball Displays, Classic PS-11610 LED Display for Williams Sys 11a, b and Data East V2
Overview
The PinScore™ Model PS-11610 LED display system is a complete drop-in replacement display system for Williams System 11A/B and Data East games. The Model PS-11610 supersedes the Model PS-12232-P77 and is compatible with the same games.
Features
- Plug ‘n Play installation; no soldering required
- Low power consumption
- Adjustable flicker-free brightness control
- Self-test diagnostic button
- 5V powered, no high-voltage required
- Black matte finish
- 5-year warranty
- Lead-free RoHS compliant
- Made in the USA
PinScore LED Displays and Power Supplies
PinScore™ LED displays are powered from the game's 5V power supply and require no high voltage. PinScore™ LED displays use nearly half the power of competitive LED displays, making them safe to add to your game. PinScore™ displays have been tested in all games and are known to work reliably. In very rare cases, a game with a failing 5V power supply may not function once a PinScore™ display is installed. Other symptoms of a failing power supply include erratic game resets and erratic game behavior. In these situations, the game's power supply should be repaired or replaced prior to installing PinScore™ LED displays.
The plasma technology found in your machine's old displays required high voltage to energize the segments. The high-voltage circuits in pinball machines have high failure rates and are difficult to repair as the parts are obsolete. LED displays will function correctly even if your original game's power high-voltage power supply has failed. You can choose to disable your high-voltage supply after installing these displays by removing the appropriate fusing (see your machine's documentation). This will reduce the risk of electric shock when servicing the machine. If your machine requires a new power supply, PinScore™ power supplies designed explicitly for LED displays are available for many games.
Kit Contents
| Qty | Part # | Description |
|---|---|---|
| 1 | PS-12232 | PinScore™ Master Board, Rev D |
| 1 | PS-DISP14A | PinScore™ 14-digit LED Panel (top pre-assembled) |
| 1 | PS-DISP14N | PinScore™ 14-digit LED Panel (bottom pre-assembled) |
| 2 | PS-LS-14 | PinScore™ Foam light shields (pre-assembled) |
| 4 | PS-8848 | Plastic standoffs (pre-assembled) |
Supported Games
PinScore™ PS-11610 Installed in Williams F-14 Tomcat. Photo courtesy Tony Crouch.
The PS-11610 supports Williams System 11A, 11B and Data East Version 2 Games, including:
Williams®
- Big Guns
- Cyclone
- F-14 Tomcat* (Late)
- Fire!
- Space Station
- Swords Of Fury
Data East®
- Playboy 35th Anniversary
- Secret Service
- Time Machine
- Torpedo Alley
Installation
- Installation time: about 20 minutes.
- Tools required: ¼” nutdriver and/or Phillips screwdriver.
- Unplug the main power from your pinball machine.
- Remove game backglass (Check owner’s manual for specific instructions).
- Unplug all display boards, connecting cables and remove original display board.
- Hand-tighten the screws so that you may align the displays with the backglass windows before finally securing the board.
- If further alignment is necessary, you may adjust the insert panel door hinges and latch in the backbox.
- Not all connectors are used on all games. The 2 connectors labeled EXTERNAL DISPLAY are not used in the PS-11610 system. The ribbon cable goes to the connector labeled MPU CABLE. The power connectors are keyed to prevent incorrect alignment. Ribbon cables are not keyed and it is possible to mis-align the connector. Observe correct polarity on all ribbon cables - the red striped wires on all ribbon cables go to Pin #1 (also labeled as RED) on all boards.
- Double-check all connections, plug in the machine, and turn the game on. The LED display will light up.
- Press the diagnostic pushbutton labeled SW1/DISPLAY TEST on the PS-12232 board. All segments of all displays should illuminate, indicating that all components of the PinScore™ system are operating correctly.
- The thumbwheel brightness control labeled R10 on the right side of the board allows you to set your preferred illumination level.
- Play Pinball!
Warranty
All PinScore™ display products are covered by a 5-year, transferrable warranty. Should your display fail, contact your distributor for repair or replacement options. PinScore™ products will be repaired or replaced at the distributor’s discretion.
PinScore™ LED displays are a replacement product for aging pinball machines. While PinScore™ LED displays are carefully engineered to replace as many high-failure parts as possible and retain robustness, there remains a possibility that other parts of your machine may need to be repaired before your game will function correctly. These parts include but are not limited to your machine’s MPU, transformer, wiring, and fuses. The PinScore™ warranty does not cover damage caused by improper installation, faulty wiring, aftermarket game modifications, and incorrect aftermarket repairs.