Overview

Brilliant design makes brilliant displays. New PinScore LED displays for pinball machines are the best performing, most feature-packed and economical replacement systems for obsolete glass plasma digital displays.

This PinScore Model PS-10749-S Display System fits Williams/United puck shuffle alley machines.

Features

• Plug & Play installation
• Adjustable brightness
• Pushbutton diagnostics
• Low power consumption uses only 5 volt power and no high voltage
• Beautiful black matte finish
• Foam light shields prevent general illumination leakage glare
• Crisp alpha and numeric digits illuminate in original font and color
• 5 year warranty
• Assembled in USA
• RoHS compliant

Kit Contents

The PS-10749-S system re-uses the original cables and plastic standoffs in the machine.  If the original cables are damaged or missing, new cables are available for purchase. 

Optional Cables and Accessories (Not Included)

Specifications

• Operating Voltage: 5 VDC
• Average Current Draw: 381 mA (All segments on, 70˚C)
• Average Power Draw: 1.9 Watts

Game Compatibility

This PinScore Model PS-10749-S Display System fits the following Williams/United puckshuffle alley machines:

• Alley Cats Shuffle
• Gold Mine Shuffle
• Tic Tac Strike Shuffle
• Top Dawg Shuffle
• Shuffle Inn
• Shuffle Inn Deluxe
• Strike Zone Shuffle (Note: This game was made with 2 different computer systems and may require PS-8000-S if your STRIKE ZONE uses a Williams System 3 computer).

PinScore LED Displays and Power Supplies

PinScore LED displays are powered from the game's 5V power supply and require no high voltage.  PinScore LED displays use nearly half the power of competitive LED displays, making them safe to add to your game.  PinScore displays have been tested in all games and are known to work reliabily. In very rare cases, a game with a failing 5V power supply may not function once a PinScore display is installed.  Other symptoms of a failing power supply include erratic game resets and erratic game behvior. In these situations, the game's power supply should be repaired or replaced prior to installing PinScore LED displays.

The plasma technology found in your machine's old displays required high voltage to energize the segments.  The high-voltage circuits in pinball machines have high failure rates and are difficult to repair as the parts are obsolete.  LED displays will function correctly even if your original game's power high-voltage power supply has failed.  You can choose to disable your high-voltage supply after installing these displays by removing the appropriate fusing (see your machine's docmentation). This will reduce the risk of electric shock when servicing the machine.  If your machine requires a new power supply, PinScore power supplies designed explicitly for LED displays are available for many games.

Installation

CAUTION: This PS-10749-S Display System CANNOT be used with any original display or driver boards. Damage to both new and old boards will occur if the systems are mixed. Please remove all original boards and install only these new boards.

1. Unplug the AC power from your pinball machine. Remove game backglass. Unscrew and remove all original glass displays, master driver board and all inter-board connecting cables.
2. Mount all new boards in their respective locations and only hand tighten the mounting screws. You may slide the LED display boards horizontally to adjust their positions for alignment with your backglass windows. If not already mounted, place the foam light shields on their respective LED display boards.
3. Connect the cables. You may re-use existing cables or optionally purchase new ones. Observe correct polarity on all ribbon cables - the red striped wires on all ribbon cables go to PIN #1 (also labeled RED) on all boards. Verify that jumper JP1 (used for shuffle games) is installed on PS-10749 Master Driver board.
4. Double-check all connections, plug in the machine, and turn the game on. The LED’s will light up. 
5. Pressing the DIAGNOSTIC pushbutton on the Master Driver board will illuminate all segments of all displays. This indicates that all boards and cables in the PinScore System are operating correctly. 
6. Use the thumbwheel BRIGHTNESS control on the Master Driver board to set your preferred illumination level.
7. Start Sliding! You’ll enjoy your PinScore Displays for years to come!

Reference Part Numbers

• UDN7180A
• D-10749 Master display board
• C-8364 Player score display 7 digit
• C-8365 Credit/frames display 4 digit

Warranty

All PinScore display products are covered by a 5-year, transferrable warranty.  Should your display fail, contact your distributor for repair or replacement options. PinScore products will be repaired or replaced at the distributor’s discretion.

PinScore LED displays are a replacement product for aging pinball machines. While PinScore LED displays are carefully engineered to replace as many high-failure parts as possible and retain robustness, there remains a possibility that other parts of your machine may need to be repaired before your game will function correctly. These parts include but are not limited to your machine’s MPU,  transformer, wiring, and fuses. The PinScore warranty does not cover damage caused by improper installation, faulty wiring, aftermarket game modifications, and incorrect aftermarket repairs.